Author: Rueben Hopps

Ontario Car Accidents Prove Freeways and Streets Risky

A few devastating car accidents have taken place in Ontario, California over the last few years. Two of these fatal car accidents occurred in almost exactly the same stretch of the 10 Freeway near Vineyard Avenue, concerning residents with the safety of their roads. Read more information here Wrongful Death Attorney Philadelphia.

 

 

The first accident involved a casino tour bus that struck the driver’s side of a fire engine. A 40-year-old firefighter was ejected from the engine and sustained major chest and head injuries while the front passenger in the tour bus, age 75, died immediately. The engine was forced to veer all the way across the freeway, but luckily no other vehicles were involved.

Responding firefighters had to cut away the crushed steel of the tour bus to release the 55 passengers. Twenty-six of the passengers were taken to the hospital with varying injuries from minor to severe, and 150 hospital personnel were called in to help with injuries.

Ontario personal injury lawyers were concerned that the tour bus, on its way to Fantasy Springs Casino in Indio, CA, was not well-driven, because fire personnel are trained to the highest of safety standards and are not likely to cause an accident, but the attorney representing the tour company said, “[they’ve] never had a serious accident.”

Two years later another tragic accident took place in the same area on the 10 Freeway. This accident involved an F-150 truck carrying seven passengers, when the driver inexplicably lost control of the vehicle. The truck impacted a tree before slamming into the freeway sound wall. Only two of the passengers, ages 3 and 10, survived the accident, but suffered major injuries. The vehicle only seats six, the California Highway Patrol noted, so one person must not have been wearing a seatbelt.

Only an empty child’s seat, a lone sneaker, and a piece of worn tire was left on the scene. After some investigation was done, the tire was found to be manufactured by Continental Tire, a company which recalled some sizes of its ContriTrac AW tired in 2002. The faulty tires have “lower than specified rubber gauge between the belt edges” and can give out, causing the driver to lose control of the vehicle.

One officer of the California Highway Patrol said, “This is the worst accident I’ve experienced in terms of the number of fatalities and children,” and Ontario car accident attorneys are concerned that the malfunctioning tire is a product liability claim that many more drivers need to be aware of.

Protecting Your Electronic Device

While you might be concerned about damage to your phone or tablet, you should be equally worried about the data on your phone being compromised. There are a few steps to prevent thieves from stealing your personal information from your electronic devices.

Back Yourself Up

Getting a backup of your device gives you a starting place to begin if something ever happens to it. The process is different for every sort of device. You can ask your retailer, service provider or some repair shops that handle cell phones or ipad glass replacement houston  if they can help you with this. There are also instructions that you can find online that will give you a step-by-step explanation of how to accomplish this. Depending on your phone or tablet, this backup can be saved on the cloud or on your computer.

Update Your System

Another way to keep your device protected is to update your operating system and the applications on your device. These updates contain measures to secure your phone or tablet against the latest bugs that break in.

Lock Up Your Device

If you have yet to set the security password to unlock the home screen on your phone, do it as soon as you can. If you lose your phone, the person who finds it will be unable to access your information on your phone making it difficult for them to steal anything sensitive. Also, change the passwords to your accounts on a regular basis and make them as difficult as you can.

Download an Antivirus App

If you are concerned you will pick up something on your device, install an antivirus app to scan for potential danger. Many companies who provide this service for computers also have developed programs to defend apps and sometimes provide it with their software. You can also find antivirus services in the App Store on your device.

The History of Political Bumper Stickers

Developed shortly after World War II, bumper stickers have been constant sites on American roadways since that time. One use for bumper stickers for political campaigns. We saw it in the last presidential election for sure, and even lesser elections promote their candidates with bumper stickers. Call them “pieces of flair” for your car – but with a political message.

It is interesting to look at some political stickers through the years. It is not entirely accurate to say that the quality of bumper sticker determines the outcome of a presidential campaign (because that would be crazy!), we will let you draw your own assumptions. It might be true that good bumper sticker doesn’t hurt.

The 1964 presidential election was a political showdown between Lyndon B. Johnson (with running mate Hubert Humphrey) on the Democrat side, and Barry Goldwater (with running mate William Miller) on the Republican side. Johnson beat Goldwater by a good margin. Johnson received 486 electoral votes to Goldwater’s 52, and he carried 44 states (plus Washington, D.C.) to Goldwater’s 6. Just in case you’re concerned about popular vote, Johnson kind of swept that, too – winning 61.1% of the popular vote.

There are pros and cons to both of these bumper stickers. Goldwater does a good thing by putting his picture on his – no matter what your mug looks like you want voters to know the faces of the guys they have to vote for. LBJ does a good thing by putting a rhyming slogan on his bumper sticker. “LBJ for the USA” has a nice ring to it. They both use kind of icky colors, but color matching wasn’t invented yet, so we cannot be sure that these photos properly depict the actual shade of these pieces of political schwag. The orangey-red is much more appealing than the goldish green, no matter which way you cut it.

The 1984 presidential election came down to Ronald Reagan and George H.W. Bush versus Walter Mondale and Geraldine Ferraro. The statistics for the election were similar in proportion to the 1964 election. Reagan-Bush received 525 electoral votes to Mondale-Ferraro’s 13, carried 49 states to the opposition’s 1 (plus Washington, D.C.), and won 58.8% of the popular vote.

This was a ground-breaking election in that Geraldine Ferraro was the first female to run for Vice President. Bumper sticker-wise, they were pretty cut-and-dry.

Obviously, it is easier to read the Reagan-Bush sticker. White text on a red background is hard to see from a car on the highway. Also, Reagan and Bush’s names are on the same level on their bumper sticker, while Mondale’s name appears above Ferraro’s on their bumper sticker. Sheer coincidence, or a strategic ploy to undermine Ferraro’s role in the campaign? Probably the former, but we love a good conspiracy theory.

The 2008 presidential election was a little closer than the previous two, but since it was the most recent it is worth mentioning. This election came down to the now-President Barack Obama (with running …

How Commercial Printing Presses Work

Back in the 15th century, the first book was printed on the first ever printing press. Small blocks of letters were placed together, brushed with ink then stamped on the parchment. Since then, the technology has changed drastically. The concepts are similar, but the speed and equipment look nothing alike.

Printing Types

Unlike in the Middle Ages, the modern printing press offers multiple types of printing. Offset, relief and gravure all use a printing plate to transfer ink to the material but operate differently. Offset printing uses a roller to transfer images from the inked plate to the printing material. Relief printing is the most popular and harks back to the original press with the reverse material put on a plate, inked then pressed onto the material. Gravure involves digging out the plate versus raising it to create the material, inking then pressing onto the material. Many of these presses use doctor blades for flexo printing to prevent the ink clogging up the machine. There are other types of printing but not as commonly used.

Ink Colors

Printing is available in full color, black and white or grayscale. Full color requires the use of four distinct colors to produce the color spectrum: black, cyan, yellow and magenta. Black and white printing only uses black ink making it a cheaper alternative to color. Grayscale helps create images because of the optical illusion created by using dots of black in a variety of sizes to create a picture. The type of color scheme you use depends on your budget, application and needs.

Printing Presses

Printing presses may no longer look much like they did when Johannes Gutenberg created movable type in 1450, but they follow similar principles to deliver sharp or contrasted images and words. A variety of material can be printed on from clothing to paper to vinyl.…

The Basics of Boiler Water Feed Systems

Many industrial companies still rely on the use of boilers for efficiency operations. Depending on the deign of system, there will be considerable pressure on the boiler feed water process to create quality steam generation. Without a highly functional system in place, you may find corrosion and scaling in the system and experience an equipment failure.

Increase Boiler Efficiency

Costly repairs and equipment downtime can be avoided by using a high quality boiler feed water treatment system. There are several components that can increase efficiency, but the deaerator plays an important role. Using both chemical and mechanical deaerator parts, the deaerator provides the highest quality water for the feed water system by removing impurities and gasses out of the system prior to use. It has four primary uses.

  1. It heats the incoming cold water to avoid thermal shock to boiler system.
  2. It helps to remove dissolved oxygen and minimize the need to use water treatment chemicals.
  3. It works to remove dissolved gases and prevent corrosion and oxygen pitting.
  4. By removing non-condensable gases, it improves the steam potential and efficiency of the system.

Cleaning Out the System

When the right parts and elements compliment the entire system, it avoid plants shutdowns and costly downtime as a result of a boiler failure. These systems also prolong the life of the equipment, saving additional funds for the company. A treatment system for boiler feed water generally combines several technologies to remove suspended solids, dissolved solids, and organic material from the freed water. Within these harmful elements, the treatment system is used to remove iron, silica, copper, magnesium, calcium, and aluminum. These are materials that create scaling and corrosion.

By improving the efficiency and capacity of your machinery and equipment, you work to improve your bottom line finances. If you don’t keep your items in good working condition, you will be spending more time on repairs than operations. This only takes away from your profit. Spend your time and money wisely, and be sure your system is working properly.…

An Ideal Flameless USB Lighter Will Never Go Out

Having a smoke when it’s windy can become a real issue for many. This is only one of the numerous drawbacks a classic lighter has. Have you often run out of fuel at the most inopportune moment? These two situations are quite frequent and irritating. As we tend to find a high-tech analogue for any household object, it’s high time to take up a flameless USB lighter! After having browsed , we have found more than 1 000 different models, many of which are of mediocre quality and are not safe.

What Are The Peculiarities Of A Flameless USB Charged Lighter?

  1. A flameless lighter doesn’t require liquid filling. It is charged via USB. It’s far easier to charge the device from a PC or any other compatible gadget while on a trip or in the office than to fill it manually, isn’t it?
  2. A flameless lighter can’t be put out. It doesn’t matter if you have a plasma one or a regular lighter, this one will never be put out by the strong wind.
  3. A flameless lighter can have a classic design. For the conservative customers familiar designs have been made. There is also a whole bunch of options for those who prefer a futuristic exterior.
  4. A fully-charged flameless lighter will work 100-150 times. Given that it takes only a couple of hours to charge the lighter from any USB-compatible device, recharge won’t be an issue.
  5. A flameless lighter is cost-saving. By buying a quality $15-20 item you’ll be able to save much as you will no longer need to constantly re-charge or buy a new disposable lighter.

As for the types of the flameless lighters, there are two of them:

  1. An arc lighter is a plasma lighter working as an electronic arc. It doesn’t get put out by the wind and needs no fuel. It can be used for any lighting purposes.
  2. A filament lighter is a regular car lighter. It is only suitable for lighting the cigarettes, anything else would become a problem.

Four Tips to Make Cleaning the Bathroom a Breeze

The bathroom is one room in the house that can seem to get messy and cluttered very, very quickly.

Products can get left lying around after a particularly lengthy soaking session, all of the mirrors and shiny bits in there can have watermarks left behind once all of the steam has disappeared and those damp & wet towels can get left lying on the floor!

If we take things in a practical and step-by-step method we can make cleaning the bathroom fun, easy and a lot quicker. Read more abot house cleaning toronto.

Firstly, you want to put some of your favourite music on, so you can boogie as you work – that’ll help the time fly by.

OK so lets start!

The Bath and the Shower:

Anything that is in the bath or the shower you will want to take out, so any washcloths and bars of soap and body-wash products place to one side. Now using the necessary cleaning products clean the inside of the shower/bath using a scrubbing sponge to make sure it’s all clean. Then rinse with warm water making sure it’s all washed away. If you have any stainless steel taps/bars etc or any glass in that area then mix one part vinegar with three parts water and put in a spray bottle and spray and wipe away – this’ll bring it all up shining! Now put any products removed back and you’re done!

Countertops:

Any countertops or windowsills can often get cluttered and dusty, I know mine do!

So again, take everything off and sort out what you need, what you don’t need either put away or throw away. Using a spray cleaner clean all the countertop surfaces, backsplash and sinks too, then rinse all of the surfaces thoroughly. It’s OK to use your vinegar mix here too. All of the products you removed earlier you can rearrange neatly back where they was, making sure it all looks in place. If you have a toothbrush holder then take the brushes out and rinse the beaker through the dishwasher, this is important as this can get very unhygienic very quickly!

The Toilet:

Anything that is on the back of the toilet you can remove, so anything on the tank it’s best to take off – then wipe down the tank and the handle. Then use your cleaning spray on the outside of the bowl and sides of the toilet, it’s better to wipe all of this down with paper towels instead of a cloth as you can throw them away afterwards. Put toilet cleaner inside the bowl following any instructions. Clean the toilet seat top and bottom with spray and then wipe down, then you can replace anything you took from the tank.

The Floors:

You’re nearly finished now, so either mop or sweep the floors depending on what type of flooring you have, empty any bins etc tidy up and store away any towels not needed and add an air freshener or two …

Tips That Will Help You Find Software Development Company

We can all agree that finding a software development company is not that simple, especially if you have in mind that an expert you choose has to help you boost your company with expertise and professionalism.

If you wish to outsource a project by finding appropriate software Development Company, it is challenging to do it because you do not want to find employee that will create havoc and reduce the quality of project you wish to send further.

For people that want to find appropriate developer company, you should check out this site: https://www.softeq.com/ar_and_vr_development  for more information. You should also learn how to make a proper decision without affecting your business capacity.

  1. Find An Expert

When you are looking for professional software developer or Development Company, the idea is to meet someone will help you improve the project you wish to send and contribute the project with his creativity and ideas to get help along the way.

Having comments on specific things and parts can be a great thing that may improve your product line, especially since the second opinion will be more objective than your team’s.

The worst thing that you can do is to be blind for your own business and sugarcoating the truth due to your inability to handle reality. The worst thing that you can do is to pay someone to tell you that you are an excellent and perfect developer.

The idea is to pay for comments that will help you improve your software and product line, which is the main reason why most companies tend to find a proactive developer.

Even though you may think that it is simple to find numerous firms available on the market from all across the globe, after comprehensive research, you will notice that the number is lower than you thought before.

The partner you choose should possess all technical skills your team requires for a specific project you wish to handle.

You do not want to pay someone who is already learning the IT sector, mainly because outsourcing developer means that you will get established expert in this area.

In case you wish to check out the market, it will be much easier to create and improve your project by handling strict demands of business and market that surrounds us. That is why you should find someone to help you without too much effort.

By clicking here, you can learn more Softeq software developing company.

2. Improve Your Business

Finding an expert software development company means that you can improve your business and everything that goes with it so that you can adjust based on market preferences and requirements.

When you are creating services and products that will appeal to customers and visitors, it is crucial to find someone to help you determine the weak areas so that you can tune it up without anyone finding out.

These developers and programmers will improve your potential as an IT company to create various developing projects. They will also …

Benefits of Outsourcing PR Firms for Public Relations

It does not matter if you have a company, firm, agency, organization, or NGO, because in all cases you need public relations.

The main question that you should ask yourself is whether you should hire someone inside your team, or outsource a firm that will handle everything along the way.

Have in mind that everything depends on the type and size of your company. For instance, at the very beginning. As a novice entrepreneur, it is vital to bring your business to a stable point before you decide to choose PR agency. Large businesses and companies will gain numerous benefits through it PR firms.

It is vital to understand that every single business should select an agency that will help you meet your needs and goals along the way. Therefore, you should know that choosing a PR agency is not that simple and you have to conduct comprehensive research along the way.

The main idea is to check out their specialties, meet former and current clients so that you can see their capabilities and expertise. You also have to be able to trust the agency with confidential information.

We decided to present you benefits that you will get with the appropriate third-party, public relations team.

1. Professionalism and Expertise

As soon as you find a professional within the world of PR specifically for your industry niche, you will be able to improve your online presence as well as brand recognition, which is an essential step towards reaching new areas and attacking new markets.

When you find an agency that will have expertise in your particular industry niche, you will be able to reach goals faster and with more efficiency than before.

Since they will have enough knowledge so that you can reach more customers within your industry that will help you improve brand awareness and increase customer’s experience of your services and products.

2. Objective Approach

An outside agency is an utterly different perspective on your industry and brand. If you look at it as an extension of your company, you will be able to get a secure and valuable view overall.

The main idea that will help you reach the natural perspective is the ability to improve media relations by getting an objective analysis of your work so far, and steps that will help you grow as time goes by.

3. You Will Get Credible Contacts

The idea is to get a reputable firm that will contact media such as newspapers, television, and other formats as well so that you can enjoy in credibility without any additional hassle. The main problem with in-house PR is that he/she needs time to develop relationships in the media.

On the other hand, firms are well connected with other professionals within the industry, which is their selling point. That will allow you to communicate with their former and current clients; conference directors and others that will help you improve the business overall.

You should check here to learn everything on PR and …

How Will Technology Affect Parking Industry

We can all agree that the worst part of driving is finding a parking spot and that is always an unpleasant and frustrating moment, especially if you are living in a major city.

The future will bring us innovations when it comes to parking, and we will use apps and smart technology along the way.

It does not matter if it involves circling the block, rushing to safely find a spot, hunting for curbside opening and other drivers that are searching for the spot as well. It is something that you have to deal with as a driver.

However, technology allowed us to handle daily activities with additional convenience, which means that today you can order through app wherever you are, use hailing services through mobile devices and check real-time traffic.

The main problem is that parking was the last advancement that software makers implemented and it is still the worst element that hasn’t improved as much in the previous few decades.

Services such as Valet Software Services will provide you perfect parking experience, and that will become part of modern life. If we consider Iota or the internet of things, we have more and more appliances and gadgets that can connect with your mobile devices.

These apps will help you improve parking perception and developing overall visibility. At the same time, after autonomous vehicle enters the general population that will dramatically affect demand and type of parking locations and infrastructure.

In most cases, technology shifts when it comes to parking will provide you an ability to handle this frustrating aspect of driving with ease.

What Is Going On Nowadays

The parking market in the USA is relatively consolidated and stable. According to statistics, it generates approximately 30 billion dollars on an annual basis.

You can choose both private and public owned parking operators that will provide you the necessary technology and staff so that you can protect your vehicle wherever you are.

These locations can vary by location, real estate type, fee type, and other factors. However, even though the market is relatively stable, it still has some underlying and persistent challenges.

The main problem is the lack of transparency when it comes to pricing and availability, which creates considerable economic costs and consumer frustration.

According to other statistical data, average Americans spend 17 hours a year searching for parking, which is a significant cost when it comes to emissions, fuel and wasted time.

If you live in a significant area, the costs can skyrocket. For businesses, on the other hand, pricing rates and policies can affect the number of customers and visitors negatively.

At the same time, private parking operators can see how technological solutions are advancing, and most apps can help you pay and find parking in the area you are so that you can accommodate your business needs.

You should check here to learn everything about parking.

Technology Will Change Parking Industry

Parking is profoundly affected by numerous factors such as patterns on how goods and …